Zurück (C) Christof Ermer, Regensburg

Gratis Counter 04.02.2011

ATtiny13-20PU  

Eigenschaften:  ATtiny13-20 PU     Kosten ~1,30€    Datenblatt : ATTiny13A.pdf

Eagle-Files: MusterBoard   ATtiny13-20PU.sch    ATtiny13-20PU.brd  

Programmgerüst: WinAvr: main.zip

  • ATtiny13-20 PU
  • High Performance, Low Power AVR® 8-Bit Mikrocontroller
  • 4 Kanal 10-bit A/D-Wandler
  • FLASH: 1 K Byte
  • EEPROM: 64 Bytes
  • SRAM: 64 Bytes
  • 20 MHz
  • I/O-Kanäle: 6
  • Versorgungsspannung: 4,5 - 5,5 V
  • Gehäuse: DIL8



  • Features

    • High Performance, Low Power AVR® 8-Bit Microcontroller
    • Advanced RISC Architecture
    – 120 Powerful Instructions – Most Single Clock Cycle Execution
    – 32 x 8 General Purpose Working Registers
    – Fully Static Operation
    – Up to 20 MIPS Througput at 20 MHz
    • High Endurance Non-volatile Memory segments
    – 1K Bytes of In-System Self-programmable Flash program memory
    – 64 Bytes EEPROM
    – 64 Bytes Internal SRAM
    – Write/Erase cyles: 10,000 Flash/100,000 EEPROM
    – Data retention: 20 years at 85°C/100 years at 25°C (see page 6)
    – Programming Lock for Self-Programming Flash & EEPROM Data Security
    • Peripheral Features
    – One 8-bit Timer/Counter with Prescaler and Two PWM Channels
    – 4-channel, 10-bit ADC with Internal Voltage Reference
    – Programmable Watchdog Timer with Separate On-chip Oscillator
    – On-chip Analog Comparator
    • Special Microcontroller Features
    – debugWIRE On-chip Debug System
    – In-System Programmable via SPI Port
    – External and Internal Interrupt Sources
    – Low Power Idle, ADC Noise Reduction, and Power-down Modes
    – Enhanced Power-on Reset Circuit
    – Programmable Brown-out Detection Circuit
    – Internal Calibrated Oscillator
    • I/O and Packages
    – 8-pin PDIP/SOIC: Six Programmable I/O Lines
    – 20-pad MLF: Six Programmable I/O Lines
    • Operating Voltage:
    – 1.8 - 5.5V for ATtiny13V
    – 2.7 - 5.5V for ATtiny13
    • Speed Grade
    – ATtiny13V: 0 - 4 MHz @ 1.8 - 5.5V, 0 - 10 MHz @ 2.7 - 5.5V
    – ATtiny13: 0 - 10 MHz @ 2.7 - 5.5V, 0 - 20 MHz @ 4.5 - 5.5V
    • Industrial Temperature Range
    • Low Power Consumption
    – Active Mode:
    • 1 MHz, 1.8V: 240μA
    – Power-down Mode:
    • < 0.1μA at 1.8V