Hier die reine LabView VI Projekt Version; LabView 2015 Software; Partikel-LaserSensor.zip
als LabView Version:
Hier die Ansicht der Labview Software, die ich dazu geschrieben habe:
Man sieht, wie beim Löten die Lötdämpfe ansteigen, --> 1 Meter
Abstand
nicht schlecht für 30€
Christof
Hier der Anschluss des USB-Com Wandlers mit +5V
(China Teil mit Prolific )
ACHTUNG Nehme alten Treiber, weil CODE 10 Fehler.
Von Links:
Pin 3= +5V
Pin 5=GND
Pin6=Rx --> Tx vom USBCom
Pin7=Rx --> Rx vom USBCom
*, *, +5V, *, Rx, Tx ( RxTx
kreuzen !)
You must follow ever step in the process in exact order.
If you still receive an error after running the
PL-2303_64bit_Installer.exe and your device is plugged in - go to
Windows Device Manager.
Windows Vista/7/8/10: Control Panel » System » Device Manager
Windows XP: Control Panel » System » "Hardware" tab » Device Manager
Scroll down to Ports (Com & LPT) and double-click on "Prolific
USB-to-Serial Comm Port (COM#)".
In the Properties Window, Click on "Driver".
The "Driver Version" must say "3.3.2.102" dated 09/24/08.
If not, then the correct driver is not installed.
Unplug the USB-To-Serial adapter and run the
"PL2303_64bit_Installer.exe" again - following the directions precisely
until the correct driver appears.